Get a straight edge every time with this easy-to-use paper trimmer that includes both scoring and cutting blades. The trimmer lets you score and cut in both directions, so it's great for both right- and left-handed crafters. The quick-cut feature allows fast, easy alignment for projects that require consecutive cuts of multiple pieces of paper (of more than 5in) to the same length.
Inch and centimeter marks
Slide-out, ruled paper guide with stops (Note: Maximum measurement is 10 1/2in)
Quick-cut ruler for fast, easy alignment
Transparent blade shuttle with magnifying window
Cutting blade and scoring blade included
Blade storage compartment underneath
Read and keep these instructions to ensure optimum safety. Attaching and removing the blade: [CAUTION: blade is very sharp.]
TO INSERT: Hold the blade unit at the end with the clear plastic safety cap, with fingers parallel to the blade. Keep cap on. Vertically insert gray plastic end into the blade shuttle and make sure it snaps in securely. Do not pull the cap off. Remove the cap by sliding it off to the side. DO NOT DISCARD THE CAP; YOU WILL NEED IT LATER.
TO REMOVE BLADE: Slide safety cap back onto the blade from the side. (You will see a slit for this in the cap.) When the blade is securely covered, pull the entire blade unit out of the shuttle. Dispose of blade properly.
Replacement blades, sold separately, can be stored in the compartment on the underside of the trimmer.